Why draught proof?
Your house or commercial property will lose heat during cold weather partly due to poor thermal insulation, but also due to the air-leakiness of the building. This warm air loss is technically known as infiltration or permeability and is measured in metres cubed per hour per square metre of floor area. A typical building built 1900 to 1990 will loose around 20-30 metres cubed of air per hour per square meter of floor area. This is due to natural leakage through the fabric of the building, but largely through gaps around windows and doors. Good use of draft proofing could reduce your air permeability to around 8-10 metres cubed per hour which is a good low cost way of reducing you heating bills. The amount of air infiltration to your property will also depend on its exposure to wind so if you are on a hillside or near the coast then it is even more beneficial for you have good draught proofing.
Double doors in your home?
This is a great solution for draught proofing the vertical gap between a pair of timber doors. Its is rarely possible to get a complete seal without this product and self adhesive draught proofing products don't tend to stick for long or come loose quickly.
2 x 100cm Lengths, enough for one pair of double doors
Suitable for internal or external doors.
Heavy duty aluminium carrier
2 Year manufacturers warranty